Skip to main content

Arduino - products that work with official Arduino boards

Arduino - products that work with official Arduino boards
Arduino - products that work with official Arduino boardsArduino - products that work with official Arduino boardsArduino - products that work with official Arduino boards



Features:
 
Motor drive module comes with its own four HG7881 chip.
Can drive 4 DC motors, or two 4-wire 2-phase stepping motor.
 
Specifications:
 
Module supply voltage: 2.5-12V
Suitable for the motor range: motor operating voltage 2.5V-12V
0.8A maximum operating current
Size: 49mm x 36mm
Color: Blue
 
Interface Description:
 
[10P black curved pin instructions]
 
1 A1 external MCU IO port
2 A2 external MCU IO port
3 B1 external MCU IO port
4 B2 external MCU IO port
5 C1 external MCU IO port
6 C2 external MCU IO port
7 D1 external MCU IO port
8 D2 external MCU IO port
9 + external 2.5V-12V voltage
10 - External GND
 
[8P PCB terminal block description]
 
   1 MOTORA is connected to DC motor with 2 pins, no direction
   2 MOTORB is connected to DC motor with 2 pins, no direction
   3 MOTORC connects DC motor with 2 pins, no direction
   4 MOTORD connects DC motor with 2 pins, no direction
 
Instructions for Use:
 
Turn on VCC, GND module power indicator is on
A1 input high level, A2 input low level, MOTORA motor forwards;
A1 input low level, A2 input high level, MOTORA motor reversed;
B1 inputs high level, B2 inputs low level, MOTORB motor rotates forward;
B1 input low level, B2 input high level, MOTORB motor reverses;
C1 input high level, C2 input low level, MOTORC motor forwards;
C1 input low level, C2 input high level, MOTORC motor reversed;
D1 input high level, D2 input low level, MOTORD motor forward rotation;
D1 input low level, D2 input high level, MOTORD motor reverses;
 
Package Incldued:
 
5 x HG7881 4-Channel DC Stepper Motor Driver Controller Board














Arduino - products that work with official Arduino boardsBuy Now


Popular posts from this blog

MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module

Buy MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module Description:   Size: 32mm X22mm X30mm length * width * height Main chip: LM393, NH3 gas sensing probe Working voltage: DC 5V   Features:   1. It has a signal output indicator indication; 2, dual signal output (analog output and TTL level output); 3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the IO port of the single chip) 4. The analog output increases with increasing concentration, and the higher the concentration, the higher the voltage; 5. High sensitivity and selectivity to ammonia; 6. Has a long service life and reliable stability; 7. Fast res ponse recovery features; 8. With mounting holes for easy installation; 9. The probe can be plugged and unplugged for easy testing.   Application:   Harmful gas detection device for home and environment, suitable for the detection of ammonia vapor, ammonia gas sensor test concentration rang...

[lzcgs] Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD

Buy Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD Specifications: Peak power: 6W Charging input: 5V Frequency response: 100Hz-20KHz Signal-to-noise ratio: 85dB Distortion: ≤0.5% Impedance: 4 Ω Inetrface: 3.5mm Color: Black bluetooth version: 5.0 Material: ABS Size: 385*45*60mm Package Included: 1 * bluetooth Digital Alarm Clock Speaker 1 * Charging Cable  1 * Manual  Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD Buy Now

ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module

Buy ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module Overview:   1. ESP-12S A9G GSM GPRS+GPS IOT Node, an all-in-one cellular phone module with WiFi module with that lets you add location-tracking, text, SMS and data to your project. This IOT node has both WiFi and GPRS support. That means it's perfect for just about any wireless or Internet-connected project. 2. This is the ESP-12S A9G GSM GPRS+GPS IOT Node, which based on the ESP-12S and the cellular phone module A9G. TWO modules all are come from Ai-thinker. With built in USB and battery charging, it is a really IOT development board. It is very useful on your IOT project. 3. At the IOT Node’s heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired u...