360 Degree Round Rotating Automatically Turntable Display Stand Photography Studio Prop Shooting Stand

Buy 360 Degree Round Rotating Automatically Turntable Display Stand Photography Studio Prop Shooting Stand

Features:

The third speed regulation is 2-4-6 revolutions per minute respectively

The maximum load-bearing capacity is 4 kg-3 kg-2 kg according to different rotating speeds

Forward and reverse rotation function

Set the round-trip rotation function according to the rotation angle. The round-trip rotation angles can be set to 45-90-180-360 degrees respectively

There are four power supply modes to choose from: USB direct insertion AC power supply, USB charging treasure power supply, three ordinary 7th batteries power supply, 18650 rechargeable lithium battery power supply

Power ON:touch any keys.

R/L:switch to clockwise or counterclockwise.

SR: speed regulation,2r/4r/6r/min.

ASA:angle regulation,45°/90°/180°/360° circulation.

IN 5V:MicroUSB 5V DC IN.

Power OFF:long press any keys for 3 seconds.

1865 lithium battery or 3 AAA battery(not include).

Charge LED indicator(built-in):red-charging,green-fully charged

Note:

Battery is not included

Pakcage Included:

1 x Photograohy Rotation Stand

360 Degree Round Rotating Automatically Turntable Display Stand Photography Studio Prop Shooting StandBuy Now

MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module

Buy MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module Description: Size: 32mm X22mm X30mm length * width * height Main chip: LM393, NH3 gas sensing probe Working voltage: DC 5V Features: 1. It has a signal output indicator indication; 2, dual signal output (analog output and TTL level output); 3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the IO port of the single chip) 4. The analog output increases with increasing concentration, and the higher the concentration, the higher the voltage; 5. High sensitivity and selectivity to ammonia; 6. Has a long service life and reliable stability; 7. Fast res ponse recovery features; 8. With mounting holes for easy installation; 9. The probe can be plugged and unplugged for easy testing. Application: Harmful gas detection device for home and environment, suitable for the detection of ammonia vapor, ammonia gas sensor test concentration rang...

[lzcgs] Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD

Buy Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD Specifications: Peak power: 6W Charging input: 5V Frequency response: 100Hz-20KHz Signal-to-noise ratio: 85dB Distortion: ≤0.5% Impedance: 4 Ω Inetrface: 3.5mm Color: Black bluetooth version: 5.0 Material: ABS Size: 385*45*60mm Package Included: 1 * bluetooth Digital Alarm Clock Speaker 1 * Charging Cable 1 * Manual Wireless bluetooth Speaker Double Units 3D Sound LED Display Alarm Clock FM Radio Soundbar Desktop Speaker AUX TF Card for Phone Laptop COD Buy Now

ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module

Buy ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module Overview: 1. ESP-12S A9G GSM GPRS+GPS IOT Node, an all-in-one cellular phone module with WiFi module with that lets you add location-tracking, text, SMS and data to your project. This IOT node has both WiFi and GPRS support. That means it's perfect for just about any wireless or Internet-connected project. 2. This is the ESP-12S A9G GSM GPRS+GPS IOT Node, which based on the ESP-12S and the cellular phone module A9G. TWO modules all are come from Ai-thinker. With built in USB and battery charging, it is a really IOT development board. It is very useful on your IOT project. 3. At the IOT Node’s heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired u...

Koa Choi

Search This Blog