Skip to main content

3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board

3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board
3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board


Buy 3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter Board


Driver: Click here to open (Windows/Mac_OS/Linux)

Features:

Fully compatible with Windows, Mac OS, Linux, support for both X86 and X64
Size: 52.5mm x 17.6mm
 
Functions:
 
Automatic recovery fuse: intelligent anti-burn, equipped with 500mA automatic recovery insurance, automatic disconnection of current over 500mA, protect your device and USB port, even if it is short circuit will not affect, after the circuit is normal, you can restore the link.
CP2102 chip: USB interface chip CP2102, high stability and high performance, communication speed up to 2Mbps.
The TTL level is compatible with the 3V3 level standard. It comes with 5V and 3.3V, 4.2V power output ports, which can supply power to the MCU system. The DTR/RTS output interface can be reserved, and the level of the two pins can be overridden through the serial port. When some MCUs download the program, the reset can be completed automatically.
Two-color LED indicator: The indicator light is red and blue respectively to indicate the working status of the module. The TX and RX lamps will flash when there is data transmission, and the transmission status is clearly visible.
3V3/4V2 output selection switch: defaults to output 3.3V from V0 port, short circuit 3V3/4V2, output 4.2V from V0 port, 5V interface directly output 5V.

Package includes:

3 x USB-T1 Adapter Board
















3pcs AI-Thinker USB to Serial Port CP2102 2.4G 433M USB to TTL Communication Module USB-T1 Adapter BoardBuy Now


Popular posts from this blog

MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module

Buy MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module Description:   Size: 32mm X22mm X30mm length * width * height Main chip: LM393, NH3 gas sensing probe Working voltage: DC 5V   Features:   1. It has a signal output indicator indication; 2, dual signal output (analog output and TTL level output); 3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the IO port of the single chip) 4. The analog output increases with increasing concentration, and the higher the concentration, the higher the voltage; 5. High sensitivity and selectivity to ammonia; 6. Has a long service life and reliable stability; 7. Fast res ponse recovery features; 8. With mounting holes for easy installation; 9. The probe can be plugged and unplugged for easy testing.   Application:   Harmful gas detection device for home and environment, suitable for the detection of ammonia vapor, ammonia gas sensor test concentration rang...
Read more

ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module

Buy ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node Development Board Module with All in One WiFi Cellular GPS Tracking Module Overview:   1. ESP-12S A9G GSM GPRS+GPS IOT Node, an all-in-one cellular phone module with WiFi module with that lets you add location-tracking, text, SMS and data to your project. This IOT node has both WiFi and GPRS support. That means it's perfect for just about any wireless or Internet-connected project. 2. This is the ESP-12S A9G GSM GPRS+GPS IOT Node, which based on the ESP-12S and the cellular phone module A9G. TWO modules all are come from Ai-thinker. With built in USB and battery charging, it is a really IOT development board. It is very useful on your IOT project. 3. At the IOT Node’s heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired u...
Read more

ZVS Tesla Coil Power Supply Boost High Voltage Generator Driver Board Induction Heating Module DIY Production Kit

Buy ZVS Tesla Coil Power Supply Boost High Voltage Generator Driver Board Induction Heating Module DIY Production Kit Product parameters: Product size: 74mm * 77.8mm; Shell size: 102*88*42.5MM; Input voltage: DC 12V-30V Power requirements: less than 12V ≥ 5A 15V or more ≥ 15A Operating frequency: 30kHz-50kHz adaptive Secondary parameter: 5T+5T About the length of the discharge arc: When the input voltage is 12v/5A, the arc distance of the high voltage discharge is about 1-2 cm. The larger the input voltage and current, the greater the output power and the longer the arc discharge distance. The maximum input is 30v/10A, and the maximum length is more than 5 cm. If the arc is too short, check if the input power is sufficient. Power supply selection: If the battery is used, use a model battery with a discharge rate of 25C or higher. Do not use an ordinary electric vehicle battery or a small battery. If you use a switching power supply, you should choose a 12V or more switching power suppl...
Read more